Updated on 2022/05/15

写真a

 
MATSUDA, Keigo
 
Affiliation
Faculty of Science and Engineering, Waseda Research Institute for Science and Engineering
Job title
Researcher(Associate Professor)

Education

  • 　
    -
    2005.03

    Tokyo Institute of Technology   Graduate School of Science and Engineering   Department of Chemical Engineering  

Research Experience

  • 2010.12
    -
    Now

    Yamagata University   Graduate School of Science and Engineering

  • 2021.04
    -
    Now

    Tohoku University   Graduate School of Engineering Department of Chemical Engineering

  • 2020.04
    -
    Now

    Waseda University   Research Institute for Science and Engineering

  • 2016.04
    -
    2020.03

    国立研究開発法人産業技術総合研究所   再生可能エネルギー研究センター   研究員

  • 2015.04
    -
    2020.03

    産業技術総合研究所   再生可能エネルギー研究センター   クロスアポイントメントフェロー

  • 2015.04
    -
    2020.03

    産業技術総合研究所   再生可能エネルギー研究センター   クロスアポイントメントフェロー

  • 2007.04
    -
    2010.11

    Yamagata University   Graduate School of Science and Engineering

  • 2007.06
    -
    2010.03

    National Institute of Advanced Industrial Science and Technology   Part-time researcher for university or other academic organization

  • 2007.06
    -
    2010.03

    National Institute of Advanced Industrial Science and Technology   Collaborative Research Scientist

  • 2005.04
    -
    2007.03

    National Institute of Advanced Industrial Science and Technology (AIST)   Researcher

  • 2005.04
    -
    2007.03

    産業技術総合研究所   環境化学技術研究部門   特別研究員

▼display all

Professional Memberships

  • 2010.12
    -
    Now

    日本学術振興会143委員会（プロセスシステム工学）

  • 2007.08
    -
    Now

    American Institute of Chemical Engineers

  • 　
    　
    　

    日本機械学会

  • 　
    　
    　

    日本エネルギー学会

  • 　
    　
    　

    分離技術会

  • 　
    　
    　

    石油学会

  • 　
    　
    　

    化学工学会

▼display all

 

Research Areas

  • Chemical reaction and process system engineering

  • Transport phenomena and unit operations

Research Interests

  • エネルギーシステム

  • プロセスシステム工学

  • 分離工学

  • 化学工学

Papers

  • Evaluation of a power generation system that integrates multiple Kalina cycles and absorption heat pumps

    Ryosuke Akimoto, Takehiro Yamaki, Masaru Nakaiwa, Keigo Matsuda

    Case Studies in Thermal Engineering   28   101363 - 101363  2021.12

    DOI

  • Applicability Study of Micro Kalina Cycle for Regional Low Grade Geothermal Heat in Japan

    Ryosuke Akimoto, Takehiro Yamaki, Masaru Nakaiwa, Keigo Matsuda

    Case Studies in Thermal Engineering    2021.10  [Refereed]  [Invited]

    Authorship：Corresponding author

  • Feasibility Study of Micro Kalina Cycle for Hot Spring Power Generation

    Ryosuke Akimoto, Takehiro Yamaki, Yasuhiko Suzuki, Masaru Nakaiwa, Keigo Matsuda

    Kagaku Kogaku Ronbunshu    2021.09  [Refereed]  [Invited]

    Authorship：Corresponding author

    DOI

  • Microwave-Assisted Heating Reactions of N-Acetylglucosamine (GlcNAc) in Sulfolane as a Method Generating 1,6-Anhydrosugars Consisting of Amino Monosaccharide Backbones

    Kaga, H, M. Enomoto, H. Shimizu, I. Nagashima, Keigo Matsuda, Seigou Kawaguchi, Atsushi Narumi

    molecules   25 ( 8 ) 1944  2020.01  [Refereed]

  • Effects of Steam on Toluene Hydrogenation over a Ni Catalys

    Atsumi, R, K. Kobayashi, C. Xieli, Tetsuya Nanba, Hideyuki Matsumoto, Keigo Matsuda, T. Tsujimura

    Applied Catalysis A: General   590 ( 1173747 ) 1 - 8  2020.01  [Refereed]

  • Effect of Chemical and Physical Properties of Titanium Oxide Support Surface During Nitrogen Monoxide Reduction by Carbon Monoxide in Presence Water over Titanium Oxide Supported Platinum Catalyst

    Kobayashi, K, S. Ogawa, Hideyuki Matsumoto, Keigo Matsuda, Tetsuya Namba

    J. Japan. Petrol. Inst   63 ( 1 ) 28 - 37  2020.01  [Refereed]

  • A Study on the Regional Value Creation by Impression Evaluation Method of Hot Spring Qualities

    Yumi Takasawa, Naoki Kodama, Keigo Matsuda

    Journal of the Japan Association of Regional Development and Vitalization    2019.03  [Refereed]

  • Energy Saving Performances of the Internal Heat Integrated Batch Distillation for Non-Ideal Mixture

    Yasuhiko Suzuki, Takehiro Yamaki, Akira Endo, Hideyuki Matsumoto, Takafumi Horie, Keigo Matsuda

    Journal of Chemical Engineering of Japan   52 ( 2 ) 215 - 221  2019.02  [Refereed]

    　View Summary

    Batch distillation is a useful separation technique for obtaining a pure product from a multi-component mixture. However, it is less energy-efficient than continuous distillation. This paper describes the system we developed for an internally heat-integrated batch distillation column (Batch or Semi-batch HIDiC) to minimize the energy consumption of the batch distillation process. We simulated the isopropyl alcohol dehydration process as a non-ideal system. The applicability of the system was examined using a commercial process simulator, Aspen Plus Dynamics (R) to evaluate energy-saving performance. The energy evaluations of the Batch and the Semi-batch HIDiC model were compared against the conventional batch distillation model. It was found that with the Semi-batch HIDiC, this system has the potential to reduce process time and energy consumption more effectively than with conventional batch distillation.

    DOI

  • Kinetic Analysis of Support Effects of Pt-loaded Catalysts on Toluene Hydrogenation at Ambient Pressure

    ATSUMI Ryosuke, CUI Xieli, MATSUMOTO Hideyuki, KOBAYASHI Keisuke, MATSUDA Keigo, TSUJIMURA Taku, NANBA Tetsuya

    Journal of the Japan Petroleum Institute   62 ( 1 ) 28 - 36  2019  [Refereed]

    　View Summary

    <p>固定層反応器内に充填したPt担持Al2O3またはTiO2触媒を用い，トルエン水素化反応試験を常圧 · 398〜473 Kの条件で実施した。トルエン，水素，MCH分圧はそれぞれ60～91，9～23，9～17 kPaで変化させた。反応温度423 K上において，Pt担持触媒はPt/Al2O3，Pt/TiO2（アナターゼ，A），Pt/TiO2（アナターゼ／ルチル混合物，AR），Pt/TiO2（ルチル，R）の順で高い活性を示したが，398 KではPt/TiO2(A)が特筆して高い活性を示した。担体化学種がPt触媒活性に及ぼす影響を評価するために，速度論解析を行った。吸着挙動が触媒活性に及ぼす影響を議論するために，Langmuir-Hinshelwood型の反応速度式を適用した。速度論解析から，反応速度定数の大きさだけでは，観測した触媒活性の序列を説明できないことが分かった。このことから，速度定数だけでは反応速度の大きさを説明できないと考えた。また，吸着平衡定数から算出した被覆率と反応速度の相関から，トルエン · MCH被覆率が反応速度とほとんど相関がないのに対し，水素被覆率と反応速度には比較的強い相関があることが分かった。</p>

    DOI

  • Design and Economic Evaluation of the Separation Processes using Inorganic Membrane Technology

    Kei Takane, Kenta Suzuki, Keigo Matsuda, Takahiro Yamaki, Akira Endo

    Membrane   44 ( 4 ) 163 - 168  2019.01  [Refereed]

  • Kinetic Analysis of Support Effects of Pt-Loaded Catalysts on Toluene Hydrogenation using Rate-based Model

    Atsumi, R, S. Xieli, Hideyuki Matsumoto, K. Kobayashi, Keigo Matsuda, T. Tsujimura, Tetsuya Namba

    J. Japan. Petrol. Inst   62 ( 1 ) 28 - 36  2019.01  [Refereed]

  • Operation Range of Modified Petlyuk Process for Separation of Benzene, Toluene and p-Xylene Mixture

    Takehiro Yamaki, Kei Takane, Ryousuke Akimot, Keigo Matsuda

    J. Japan. Petrol. Inst   62 ( 1 ) 45 - 51  2019.01  [Refereed]

  • Separation of 2-Propanol/Water/n-Hexane Ternary System using the Batch Distillation Commercial Plant

    Yasuhiko Suzuki, Takahiro Yamaki, Ryosuke Akimoto, Keigo Matsuda

    Kagaku Kogaku Ronbunshu   44 ( 6 ) 350 - 354  2018.11  [Refereed]

  • Economic evaluation of heat-pump-assisted distillation systems

    Kenta Suzuki, Kei Takane, Takehiro Yamaki, Toshihiro Wakabayashi, J. Rafael Alcantara Avila, Hideyuki Matsumoto, Takafumi Horie, Masaru Nakaiwa, Keigo Matsuda

    Kagaku Kogaku Ronbunshu   44 ( 5 ) 303 - 307  2018.10  [Refereed]

    　View Summary

    © 2018 The Society of Chemical Engineers, Japan. Heat-pump-assisted distillation columns such as the vapor recompression column (VRC), self-heat recuperation column (SHRC), and heat integration column (HIDiC) have attracted attention in industry because of their strong impact on energy savings in chemical processes. Compared to conventional distillation columns, these systems have the advantage of reducing operation and construction costs, but little work has been done to evaluate the cost of these systems. This study employed the commercial process simulator Aspen Plus® to evaluate energy saving and economic performances. The heat-pump-assisted distillation distillation systems were economically superior to the conventional process for separation of a propylene-propane mixture. In particular, a thermally optimized HIDiC reduced energy consumption and total annual cost by 64 and 56% respectively in comparison with the conventional distillation process.

    DOI

  • Kinetics, Isotherm and Thermodynamics of Adsorption of Sterol on Strong Acid Ion Exchange Resin

    Chinakrit Ladadok, Taehiro Yamaki, Keigo Matsuda, Hideyuki Matsumoto, Na-Ranong Duangkamo

    Chemical Engineering Transactions   70   1075 - 1080  2018.09  [Refereed]

  • Ring-Expansion/Contraction Radical Crossover Reactions of Cyclic Alkoxyamines: A Mechanism for Ring Expansion-Controlled Radical Polymerization

    Atsushi Narumi, Tetsuya Kobayashi, Masatsugu Yamada, Wolfgang Binder, Keigo Matsuda, Montaser Shaykoon, Kazushi Enomoto, Moriya Kikuchi, Seigou Kawaguchi

    Polymers   10 ( 6 ) 638 - 638  2018.06  [Refereed]

    DOI

  • Amperometric sensing of H2O2 and glucose using wet-chemically deposited MnO2 thin films

    Terukazu Kondo, Yuta Matsushima, Keigo Matsuda, Hidero Unuma

    Journal of the Ceramic Society of Japan   126 ( 4 ) 260 - 262  2018.04  [Refereed]

    　View Summary

    Herein, we report that -MnO2 thin films wet-chemically deposited on electro-conductive substrates exhibited good sensing abilities toward hydrogen peroxide and glucose without the assistance of immobilized enzymes, as well as the excellent supercapacitic performance described in our previous paper. High-sensitivity values of 380mA/(M·cm2) (H2O2) and 300mA/(M·cm2) (glucose) were attained with low detection limits of 0.7-mol/dm3 (H2O2) and 0.6-mol/dm3 (glucose). The good sensitivities and low detection limits were attributed to the large surface area of accumulated MnO2 nanosheets and their firm adhesion to the substrates. The method presented herein can be used for facile film deposition with good controllability and reproducibility.

    DOI

  • Energy-saving Performance of Reactive Distillation Process for TAME Synthesis through Multiple Steady State Conditions

    Takehiro Yamaki, Keigo Matsuda, Na-Ranong Duangkamo, Hideyuki Matsumoto

    Chemical Engineering and Processing: Process Intensification   130   100 - 109  2018.04  [Refereed]

  • Improvement of separation performance by fluid motion in the membrane module with a helical baffle

    Takaaki Aakagi, Takafumi Horie, Hayato Masuda, Keigo Matsuda, Hideyuki Matsumoto, Naoto Ohmura, Yushi Hirata

    Separation and Purification Technology   198 ( 8 ) 52 - 59  2018.03  [Refereed]

  • Kinetics, Isotherm and Thermodynamics of Sterol Adsorption on Styrene-Divinylbenzene Anion-Exchange resins

    Ladadok C, Takehiro Yamaki, Keigo Matsuda, Hideyuki Matsumoto, Na-Ranong Duangkamo

    ScienceAsia   44   346 - 354  2018.01  [Refereed]

  • Fabrication of hybridized microparticles composed of mesoporous manganese dioxide and fullerene C60 nanocrystals

    Yuma Matsukubo, Nobuhiro Shimamura, Ayaka Toba, Toshihiko Arita, Tsukasa Yoshida, Hiroshi Yabu, Keigo Matsuda, Akito Masuhara

    Chemistry Letters   47 ( 3 ) 347 - 349  2018  [Refereed]

    　View Summary

    Hybridized microparticles composed of mesoporous manganese dioxide (MPMO) core and fullerene C60 nanocrystal (NCs) shell were fabricated by co-reprecipitation method. Double layer capacitance as well as fast surface redox reaction of MPMO contributes to increase the energy density, whereas C60 NCs contributes to the reduction of IR loss to enhance the power density. The coating of MPMO with C60 NCs resulted in a greatly improved pseudocapacitor performance, owing to the improved conductivity to allow fast charging/ discharging.

    DOI

  • Preparation of Porous Titania by Sol-Gel Method Using Alkylketene Dimers as a Template

    Risa Takahashi, Hideyuki Matsumoto, Takafumi Horie, Keigo Matsuda

    JOURNAL OF CHEMICAL ENGINEERING OF JAPAN   50 ( 6 ) 450 - 454  2017.06  [Refereed]

    　View Summary

    Porous titania (TiO2) particles were prepared using a sol-gel technique employing Alkylketene Dimers (AKD) as a template. The effects of incremental additions of AKD as a template material on crystal structure, surface and internal morphology, and pore properties were investigated using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and nitrogen adsorption/desorption. The prepared titania had more than one pore size on its surface and internally. Incremental addition of AKD caused an increase in specific surface area. The prepared porous titania with the addition of AKD at 5 wt% exhibited a high specific surface area of 124 m(2)/g, which is markedly higher than in titania without AKD (53.5 m(2)/g). To quantitatively evaluate the porous structure, we performed fractal analysis over a wide scale using box-counting, small X-ray scattering (SAXS) and the FHH (Frenkel-Halsey-Hill) method. Porous titania showed fractal properties, both on its surface and internally.

    DOI

  • Application Method of Rate Based Model to Analysis of Dynamic Behavior of Stirred Tank Reactor for Phase Transfer Catalysis with the Third Liquid Phase

    Hideyuki Matsumoto, Shiro Yoshikawa, Keigo Matsuda, Takafumi Horie, Daisuke Kobayashi

    JOURNAL OF CHEMICAL ENGINEERING OF JAPAN   50 ( 6 ) 408 - 414  2017.06  [Refereed]

    　View Summary

    In order to intensify a phase transfer catalytic reactor with the third liquid phase, it is necessary to optimize multiple operation variables that are concerned with the mass transfer rate. In the present paper, we propose a systems approach by application of a rate based model for mass transfer between two phases. Application of the developed rate based model performs simulation with higher accuracy than the conventional partition equilibrium model, for numerical analysis of behavior of a batch process for the synthesis of 4-benzyloxy-vanillin by using tetrabutylammonium bromide as the phase transfer catalyst. Moreover, influences of the rotational speed of the impeller on changes in the overall mass transfer coefficients are analyzed by using estimation equations for the Sauter diameter and the specific interfacial area of the dispersed phase. Consequently, it is found that the assumption of spherical droplets for the dispersed phase is not applicable in the application of the estimation equations. Then, the sensitivity analysis based on the rate based model demonstrates that characteristics of liquid-liquid dispersion in the agitated triphase reactor is complex due to the role of the third phase as a surfactant.

    DOI

  • Design to the D Structures of Porous TiO2 by using Machine Learning via Multiscale Structure Analysis

    M. Otani, K. Matsuda

    Proceedings of 11th International Conference on Separation Science and Technology    2017

  • Development of Cascade type Binary Cycle Power Generation System through the Low-heat Energy

    R. Akimoto, Y. Domori, K. Matsuda

    Proceedings of 11th International Conference on Separation Science and Technology    2017

  • Separation Performance for Propylene-Propane mixture using Membrane Separation and Hybrid Membrane Separation-Distillation Processes

    T. Yamaki, M. Yoshimune, N. Hara, H. Negishi, K. Suzuki, K. Matsuda

    Proceedings of 11th International Conference on Separation Science and Technology    2017

  • Energy Saving Performance of Heat Pump assited Distillation-Membrane Hybrid Process in Propylene-Propane Separation

    K. Takane, K. Suzuki, T. Yamaki, K. Matsuda

    Proceedings of 11th International Conference on Separation Science and Technology    2017

  • Electrochemical properties of delta- and gamma-MnO2 thin films deposited by a chemical bath technique

    Terukazu Kondo, Yuta Matsushima, Keigo Matsuda, Hidero Unuma

    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS   27 ( 8 ) 8001 - 8005  2016.08  [Refereed]

    　View Summary

    In this study, gamma- and delta-MnO2 thin films were deposited onto F-doped tin oxide glass substrates via a chemical bath deposition technique in which manganese (II) ions were oxidized by bromate ion in a homogeneous solution. The addition of cetyltrimethylammonium chlorate to the starting solutions resulted in the deposition of the delta-phase. The thin films showed rectangular cyclic voltammograms even at higher scan rates. The delta-phase films showed better specific capacitance than the gamma-phase films. A 200-nm-thick delta-MnO2 film showed an excellent specific capacitance of 750 F/g at a scan rate of 10 mV/s.

    DOI

  • Energy Saving Characteristics of an Internal Heat Integrated Reactive Distillation Process for Methyl Acetate Synthesis

    Takehiro Yamaki, Keigo Matsuda, Duangkamol Na-Ranong, Hideyuki Matsumoto

    KAGAKU KOGAKU RONBUNSHU   42 ( 2 ) 56 - 59  2016.03  [Refereed]

    　View Summary

    A model for an internally heat integrated reactive distillation process without a compressor was developed, and the synthesis of methyl acetate from methanol and acetic acid was simulated. The applicability was evaluated by using the process simulator Aspen Plus. The steady state simulation showed that the energy consumption of the heat integrated reactive distillation process was lower than that of conventional reactive distillation.

    DOI

  • Dynamic Behaviors of the Dividing Wall Column for Separation of an Ideal Mixture

    T. Yamaki, K. Matsuda

    Proceedings of 7th International Symposium on Design, Operation and Control oc Chemical Processes    2016  [Refereed]

  • Evaluation of Energy Saving and Economic Performance of Heat Pump Assisted Distillation Columns

    Suzuki, K, T. Yamaki, K. Matsuda

    Proceedings of 7th International Symposium on Design, Operation and Control oc Chemical Processes    2016  [Refereed]

  • Energy Saving Performances of the Internal Heat Integrated Batch Distillation for Dehydration Process

    Suzuki, Y, T. Yamaki, K. Matsuda

    proceedings of 7th International Symposium on Design, Operation and Control oc Chemical Processes    2016  [Refereed]

  • Preparation of Multi Porous TiTANIA by Using AKD and Fractal Analysis

    Takahashi, R, T. Yamaki, K. Matsuda

    Proceedings of 7th International Symposium on Design, Operation and Control oc Chemical Processes    2016  [Refereed]

  • Heat and Mass Transfer of Internally Heat Integrated Distillation Column (HIDiC)

    Keigo Matsuda, Koichi Iwakabe, Masaru Nakaiwa

    JOURNAL OF THE JAPAN PETROLEUM INSTITUTE   58 ( 4 ) 189 - 196  2015.07

  • Application methods for a niche genetic algorithm for design of reactive distillation processes

    Hideyuki Matsumoto, Kai Tun Lim, Chiaki Kuroda, Takehiro Yamaki, Keigo Matsuda

    Smart Innovation, Systems and Technologies   30   313 - 326  2015  [Refereed]

    　View Summary

    A purpose of this chapter is to investigate application methods for a niche GA to design of Reactive Distillation (RD) process involving the production and separation of ethyl acetate. First, optimization system based on the Multi- Niche Crowding – Genetic Algorithm (MNC-GA) is demonstrated to be effective in searching preferable designs of RD process using multiple feeds from each reactant. It is seen that the MNC-GA allows the search to yield various design solutions without causing remarkable performance degradation for searching the best design. Thus, authors investigate application methods for utilizing the various design solutions from the viewpoint of analysis of operability of searched process. It is shown that the multiple preferable designs obtained using the MNC-GA are useful for searching more preferable designs by steady-state process simulation and for sensitivity analysis which provides us with insights to the dynamics in RD column. In addition, intermediate simulation results, which are obtained through all the generations, are demonstrated to produce informative distributed plots for the sensitivity analysis, as compared to the normalGA where the tournament-based selection method is used.

    DOI

  • Separation Performance of Dehydration of IPA Solution Using Adsorption - Distillation Hybrid System

    T. Yamaki, A. Endo, K. Matsuda

    Proceedings of 10th International Conference on Separation Science and Technology    2014

  • Experimental Study of an Internally Heat-Integrated Batch Distillation Column

    Suzuki, Y, T. Yamaki, K. Matsuda

    Proceedings of 10th International Conference on Separation Science and Technology    2014

  • Effect of Operating Conditions on the Multiple Steady States in Reactive Distillation

    Takehiro Yamaki, Masahiro Shishido, Keigo Matsuda, Hideyuki Matsumoto

    KAGAKU KOGAKU RONBUNSHU   40 ( 3 ) 244 - 249  2014  [Refereed]

    　View Summary

    The effects of operating conditions such as reflux ratio and reboiler duty on the product composition and reaction performance were discussed based on a simulation model of reactive distillation with multiple steady states(MSS). The region of MSS, determined by bifurcation analysis, was found to shift toward higher reboiler duty along with increase of reflux ratio. Separation and reaction performance under the MSS condition was higher than that in the absence of an MSS region.

    DOI

  • The Process Operation of Reactive Distillation for TAME Synthesis through Multiple Steady-State Conditions

    Takehiro Yamaki, Tatsuro Ikoshi, Masahiro Shishido, Keigo Matsuda, Hideyuki Matsumoto

    KAGAKU KOGAKU RONBUNSHU   40 ( 3 ) 240 - 243  2014  [Refereed]

    　View Summary

    Process dynamics of reactive distillation with multiple steady states (MSS) was investigated to provide a novel operation procedure. The existence of MSS was first clarified using a simulation model with bifurcation analysis. Dynamic simulations under MSS conditions were next performed and showed that the MSS had both stable and unstable solutions. The dynamic simulation results indicated the potential for operation using multiple steady-state conditions.

    DOI

  • A Framework for Application of Genetic Algorithm to Model-Based Design of Reactive Distillation Process

    Kai Tun Lim, Hideyuki Matsumoto, Takehiro Yamaki, Keigo Matsuda

    JOURNAL OF CHEMICAL ENGINEERING OF JAPAN   47 ( 2 ) 187 - 194  2014  [Refereed]

    　View Summary

    In the present study, we investigate a framework for the application of genetic algorithm (GA) methods to reactive distillation (RD) process design. First, a computational method for hybrid simulation is proposed by linking a commercial process simulator with an in-house GA-based optimizer in order to accelerate the search for process designs showing high performance. When developing the hybrid simulation system, detailed methods for the GA operations of crossover, mutation, and selection were investigated to achieve a combination that maximizes the effectiveness of the simulation framework. Next, we investigate the designs obtained from the simulations for a case study, an RD process for acetyl acetate. The proposed GA method is shown to provide not only the lowest total annual cost (TAC) design, but also various alternative design solutions. Since the generation of alternative designs lets us consider many other factors, e. g., the distillate composition and the overall conversion of the product, we believe that the application of techniques such as multi-niche crowding (MNC) GA could be effective for searching simulataneously structural and operational conditions of multifunctional processes.

    DOI

  • Recent Advances in Internally Heat-Integrated Distillation Columns (HIDiC) for Sustainable Development

    Keigo Matsuda, Koichi Iwakabe, Masaru Nakaiwa

    JOURNAL OF CHEMICAL ENGINEERING OF JAPAN   45 ( 6 ) 363 - 372  2012

  • Star Polymer with Crosslinked Core and Water-Soluble Poly(N-hydroxyethylacrylamide)-Arms: Synthesis by Arm-First Method Using ATRP and Characterizations by SEC-MALS and SAXS Measurement in Water

    A Narumi, Y. Ohashi, D. Togashi, Y. Sato, Y. Jinbo, Y. Izumi, Keigo Matsuda, T. Kakuchi, S. Kawaguchi

    Journal of Polymer Science   50   3546 - 3559  2012.01  [Refereed]

  • Control of reactive distillation through the multiple steady state conditions

    Takehiro Yamaki, Keigo Matsuda

    Chemical Engineering Transactions   29   223 - 228  2012  [Refereed]

    　View Summary

    In this paper, the controllability of reactive distillation (RD) on the multiple steady states (MSS) was analysed. We used the RD column for tert-amyl methyl ether (TAME) synthesis for a case study. The model was prepared five PI controllers which control liquid level, feed flow rate, pressure of column overhead and bottom product composition. Initial conditions of dynamic simulation were chose three cases each of upper, middle and lower branches on the MSS. Product composition was controlled for the ±10 % disturbances of feed flow rate and reflux ratio. However, pressure disturbance was failed to keep the set point. These phenomena are able to explain the bifurcation diagrams. Copyright © 2012, AIDIC Servizi S.r.l.

    DOI

  • Energy saving performance of internal heat-integrated batch distillation

    Yasuhiko Suzuki, Takehiro Yamaki, Keigo Matsuda, Koji Takahashi, Akira Endo, Masaru Nakaiwa

    Chemical Engineering Transactions   29   277 - 282  2012  [Refereed]

    　View Summary

    A model for an internally heat-integrated batch distillation column (Batch or Semi-batch HIDiC) was developed, and the separation of a benzene-toluene binary mixture was simulated. The applicability of the model was examined by using the commercial process simulator Aspen Plus Dynamics® to evaluate energy-saving performance and process time against the compression ratio and reflux ratio. The batch or semi-batch HIDiC model results were compared with the conventional batch distillation model. It was found that with the semi-batch HIDiC, the model has the potential to reduce process time and energy consumption more precisely than the conventional batch distillation model. Copyright © 2012, AIDIC Servizi S.r.l.

    DOI

  • Control of Reactive Distillation through the Multiple Steady State Conditions

    Takehiro Yamaki, Keigo Matsuda

    PRES 2012: 15TH INTERNATIONAL CONFERENCE ON PROCESS INTEGRATION, MODELLING AND OPTIMISATION FOR ENERGY SAVING AND POLLUTION REDUCTION   29   223 - 228  2012  [Refereed]

    　View Summary

    In this paper, the controllability of reactive distillation (RD) on the multiple steady states (MSS) was analysed. We used the RD column for tert-amyl methyl ether (TAME) synthesis for a case study. The model was prepared five PI controllers which control liquid level, feed flow rate, pressure of column overhead and bottom product composition. Initial conditions of dynamic simulation were chose three cases each of upper, middle and lower branches on the MSS. Product composition was controlled for the +/-10 % disturbances of feed flow rate and reflux ratio. However, pressure disturbance was failed to keep the set point. These phenomena are able to explain the bifurcation diagrams.

    DOI

  • Adsorption Performance of the Irregular Porous Silica and Their Fractal Analysis

    T. Fujio, K. Matsuda, A. Endo

    Proceedings of 9th International Conference on Separation Science and Technology    2011

  • Process Intensification of Reactive Distillation through the Multiple Steady State Conditions

    T. Yamaki, K. Matsuda

    proceedings of 9th International Conference on Separation Science and Technology    2011

  • Process Intensification for the Energy-Saving Distillation Processes

    M. Nakaiwa, K. Matsuda

    Proceedings of 9th International Conference on Separation Science and Technology    2011  [Invited]

  • One-pot Synthesis of Manganese Oxide Nanoparticles from Microemulsion Systems

    T. Miyazawa, Keigo Matsuda, A. Fijimori, Y. Nonomura

    Chem. Lett.   40   1262 - 1263  2011.01  [Refereed]

  • Preparation of Electrically Conductive film from silver nano-colloid synthesized by reduction of silver-thiolate

    Miyashima N, Masahiro Shishido, Keigo Matsuda

    Chem. Lett   40   1260 - 1261  2011.01  [Refereed]

  • Solid-state Structure and Formation of Organized Films for Three-arm Amphiphilic Polymer with Metal-Scavenging Property

    Hakozaki S, Keigo Matsuda, B. Ochiai, A. Fujimori

    Trans. Mater. Res. Soc. Japan   36 ( 2 ) 153 - 156  2011.01  [Refereed]

  • Effect of Gas-Liquid Slug Flow on Continuous Preparation of ZnS:Mn Nanocrystals in Thin Tube Reactor

    Masahiro Shihido, H. Abe, Keigo Matsuda

    KAGAKU KOGAKU RONBUNSHU   37 ( 2 ) 96 - 99  2011.01  [Refereed]

  • Effect of Heat Transfer Characteristics on the Compression Process for an Internally Heat-Integrated Distillation Column

    Keigo Matsuda, Koichi Iwakabe, Takehiro Yamaki, Yasuhiko Suzuki, Masahiro Shishido, Toshihiro Wakabayashi, Masaru Nakaiwa

    KAGAKU KOGAKU RONBUNSHU   37 ( 2 ) 100 - 103  2011  [Refereed]

    　View Summary

    The present work discusses a method for process intensification of the distillation process of separation. A model of an internally heat-integrated distillation column (HIDiC) of concentric type was developed using a rate-based model, and the separation of a binary mixture was simulated in a simulator which is capable of predicting steady-state conditions. The developed model was applied to a concentric-type HIDiC, and the heat transfer and operation performances were compared. This process improved the function and performance of conventional distillation separation process and could be miniaturized. In addition, the HIDiC showed highly energy saving performance compared with the conventional distillation processes.

  • Steady State Simulation of Reactive Distillation for TAME Synthesis

    Keigo Matsuda, Tatsuro Ikoshi, Takehiro Yamaki, Masahiro Shishido, Koichi Iwakabe, Takao Ohmori, Masaru Nakaiwa

    KAGAKU KOGAKU RONBUNSHU   37 ( 2 ) 104 - 109  2011  [Refereed]

    　View Summary

    The present work proposes a method for process intensification of the reaction-separation process. A model of the reactive distillation (RD) system involving a prereactor was developed by use of an equilibrium stage model, and the reaction-separation of a multicomponent mixture was simulated by use of a simulator that was capable of predicting steady-state conditions. The developed model was applied to an RD system with multi-feed, and the reaction-separation and operation performance were examined. As a result, the RD system was found to be usable for reaction-separation interaction phenomena. This process improved the function and performance of conventional reaction-separation process and could be miniaturized.

  • A Basic Study on the Applicability of Internal Heat-Integration to Batch Distillation

    Takehiro Yamaki, Yasuhiko Suzuki, Keigo Matsuda, Masahiro Shishido, Koji Takahashi, Masaru Nakaiwa

    KAGAKU KOGAKU RONBUNSHU   37 ( 3 ) 241 - 245  2011  [Refereed]

    　View Summary

    A model for an internally heat-integrated batch distillation column (Batch or Semi-batch HIDiC) was developed, and the separation of a benzene-toluene binary mixture was simulated. The applicability of the model was examined by using the commercial process simulator Aspen Plus Dynamics (R) to evaluate energy-saving performance and process time against the compression ratio and reflux ratio. The batch or semi-batch HIDiC model results were compared with the conventional batch distillation model. It was found that with the semi-batch HIDiC, the model has the potential to reduce process time and energy consumption more precisely than the conventional batch distillation model.

  • Separation of Binary Azeotrope Mixture via Pressure-Swing Distillation with Heat Integration

    Keigo Matsuda, Kejin Huang, Koichi Iwakabe, Masaru Nakaiwa

    JOURNAL OF CHEMICAL ENGINEERING OF JAPAN   44 ( 12 ) 969 - 975  2011  [Refereed]

    　View Summary

    This paper addresses the addition of internal heat integration to the pressure-swing distillation ( PSD) process used in the separation of binary pressure-sensitive azeotropes. The primary step in the process design is to determine the pressure elevation from the low-to high-pressure distillation columns, followed by the design of internal heat integration between the two distillation columns. A general procedure is suggested and illustrated through the separation of an acetonitrile-water binary mixture, which forms pressure-sensitive minimum-boiling azeotropes. Comparisons are made between the conventional and the internally heat integrated PSD processes. It is demonstrated that breaking pressure-sensitive azeotropic mixtures can be made more economical than the current practice with conventional PSD processes. However, the degree of cost reduction is strongly dependent upon the properties of the mixtures to be separated.

  • Enhancing Productivity of Reactive Distillation Through the Multiple Steady State Conditions

    T. Yamak, T. Ikoshi, K. Matsuda, T. Ohmori, M. Nakaiwa

    Proceedings of International Worklshop on Process Intensification 2010    2010  [Refereed]

  • Operation of Commercial-Scale Batch Distillation System for Isopropyl Alcohol Dehydration Process

    Y. Suzuki, N. Ohtaki, T. Yamaki, K. Matsuda, K. Takahashi, M. Nakaiwa

    Proceedings of 19th International Congress of Chemical and Process Engineering    2010  [Refereed]

  • Preparation of Porous Titania Photocatalyst from Titanium Waste Fluid

    M. Kimata, K. Matsuda, M. Hasegawa

    Proceedings of 19th International Congress of Chemical and Process Engineering    2010  [Refereed]

  • Modification of LiMn₂O₄ Surface using Surfactant Micelles

    Keigo Matsuda, E. Kimura, Akira Endo, Masahiro Shishido, M. Kimata, T. Nishina

    Trans. Mater. Res. Soc. Japan   35 ( 4 ) 883 - 836  2010.01  [Refereed]

  • Preparation of Copper Particles in Concentric Microreactor and Bach Reactor

    Kimata, M, K. Hirohara, Keigo Matsuda, M. Hasegawa

    Trans. Mater. Res. Soc. Japan   35 ( 4 ) 837 - 840  2010.01  [Refereed]

  • Dynamic Behavior of an Internally Heat-Integrated Distillation Column (HIDiC)

    Keigo Matsuda, Koichi Iwakabe, Takao Ohmori, Masaru Nakaiwa

    PRES 2010: 13TH INTERNATIONAL CONFERENCE ON PROCESS INTEGRATION, MODELLING AND OPTIMISATION FOR ENERGY SAVING AND POLLUTION REDUCTION   21   127 - 132  2010  [Refereed]

    　View Summary

    This paper reports the analysis of the energy saving for design of an internally heat integrated distillation column (HIDiC) conducted in the second-phase of Japanese national research project for energy conservation in multicomponent petroleum distillation. The practical commercial scale distillation column separating cyclopentane from a multicomponent mixture consisting of mainly C5 hydrocarbons was selected as a target of the application of HIDiC technology. By choosing the compression ratio, the number of the theoretical stages, and the heat transfer rate as design and operating variables, temperature, pressure, flow rates, and composition profiles were computed as well as the reboiler heat duty of the HIDiC by Pro/II. The energy consumption of the HIDiC was compared with that of the practical conventional distillation column operated at the minimal reflux ratio. It was confirmed that at least 25 % of energy saving can be achieved by means of the HIDiC system. A pilot plant of the HIDiC was designed based on the results obtained in this study. It was constructed and has been in operation since 2005. The pilot HIDiC shows more than 50 % of energy savings compared to the conventional distillation column, validating the analysis of this study.

    DOI

  • Energy saving Heat Integrated Distillation System of 12 Hydrocarbon Separator

    T. Nakanishi, N. Nishida, A. Adachi, H. Ikeda, K. Matsuda, K. Iwakabe, K. Horiuchi, M. Nakaiwa

    Proceedings of 8th World Congress of Chemical Engineering    2009

  • Targeting Synergetic Effect in Distillation Processes

    M. Nakaiwa, K. Huang, K. Iwakabe, K. Matsuda

    Proceedings of 8th World Congress of Chemical Engineering    2009  [Refereed]  [Invited]

  • The Economical Estimation of Heat Integrated Distillation Column

    K. Horiuchi, K. Matsuda, M. Nakaiwa

    proceedings of 8th World Congress of Chemical Engineering    2009  [Refereed]  [Invited]

  • Dynamic behavior of Reactive Distillation System

    K. Matsuda, T. Ikoshi, K. Iwakabe, T. Ohmori, M. Nakaiwa

    proceedings of 8th World Congress of Chemical Engineering    2009  [Refereed]  [Invited]

  • Evaluation of Economical and Environmental Performance of an Internally Heat-integrated Distillation Column (HIDiC)

    Kinpei Horiuchi, Keigo Matsuda, Koichi Iwakabe, Masaru Nakaiwa

    KAGAKU KOGAKU RONBUNSHU   34 ( 4 ) 444 - 447  2008.07  [Refereed]

    　View Summary

    Optimum operation, energy saving, carbon-dioxide emission and cost estimation of a pilot plant of ail internally heat-integrated distillation column (HIDiC) separating a twelve-component hydrocarbon mixture to obtain residue-product of crude cyclopentane were studied. From the operation results of the HIDiC at zero external reflux and reboiler free operation, the reduction in CO(2) emission by the HIDiC was 56.6 kg/h (453 t/y), which is 63.5% of the total CO(2) emission of the conventional distillation column. The HIDiC pilot plant is expected to be reasonable in view of the inflation of the steam cost. The cost estimation results were also compared with those obtained from the conventional column, which showed that the HIDiC pilot plant can provide a strikingly shorter payback time.

  • Dynamic behavior and Process Design of Reactive Distillation Systems

    K. Matsuda, T. Ikoshi, K. Iwakabe, T. Ohmori, M. Nakaiwa

    International Workshop on Process Intensification 2008    2008  [Refereed]

  • Continuous synthesis of ZnS nanocrystals through hot soap process by using capillary-type reactor

    M. Shishido, H. Abe, K. Matsuda

    Proceedings of 18th International Congress of Chemical and Process Engineering    2008  [Refereed]

  • Rate based analysis of internally heat integrated distillation columns (HIDiC)

    K. Iwakabe, K. Matsuda, M. Ikeda, A. Horiguchi, K. Kubo, M. Nakaiwa, S. Taniguchi, S. Kataoka, T. Yamamoto, T. Ohmori

    Proceedings of 11th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction    2008  [Refereed]

  • Synthesis of Porous LiMn2O4 Powders by the Solvent Evaporation Method

    K. Matsuda, E. Kimura, A. Endo

    Proceedings of 8th European symposium on electrochemical engineering    2008  [Refereed]

  • Simulation and Design of Heat-Integrated Distillation Column (HIDiC)

    K. Matsuda, K. Iwakabe, M. Nakaiwa, T. Higuchi, A. Sasaki, M. Shishido

    Proceedings of 11th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction    2008  [Refereed]

  • Analysis of Operation Results of the Internally Heat Integrated Distillation Column (HIDiC) Pilot Plant In Japan

    K. Iwakabe, K. Horiuchi, K. Matsuda, T. Nakanishi, M. Ikeda, S. Taniguchi, T. Yamamoto, S. Kataoka, T. Ohmori, M. Nakaiwa

    Proceedings of AIChE Annual Meeting    2008  [Invited]

  • Towards Further Contribution to Reduction of CO2 Emissions by An Ideal

    M. Nakaiwa, K. Iwakabe, K. Matsuda

    Proceedings of AIChE Annual Meeting    2008  [Invited]

  • Energy Saving Characteristics of the Internally Heat Integrated Distillation Column (HIDiC) Pilot Plant for Multicomponent Petroleum Distillation

    Horiuchi K, Y. Shibata, K. Yanagimoto, K. Kataoka, Masaru Nakaiwa, Koichi Iwakabe, Keigo Matsuda

    JOURNAL OF CHEMICAL ENGINEERING OF JAPAN   41 ( 8 ) 771 - 778  2008.01  [Refereed]

  • Consider Heat integration to Improve Separation Performance

    kejin Huang, Koichi Iwakabe, Masaru Nakaiwa, Keigo Matsuda, K. Horiuchi, T Nakanishi

    Hydrocarbon Processing   87   101 - 108  2008.01  [Refereed]

  • Development of High Performance Distributor for Internally Heat Integrated Distillation Column

    Nakanishi, T, N. Adachi, K. Aso, Koichi Iwakabe, Keigo Matsuda, K. Horiuchi, Masaru Nakaiwa, Takeichirou Takamatsu

    KAGAKU KOGAKU RONBUNSHU   34   224 - 229  2008.01  [Refereed]

  • Simulation of Multicomponent Separation in Internally Heat Integrated Distillation Column using the Compact Heat Exchanger System

    Keigo Matsuda, Koichi Iwakabe, Masaru Nakaiwa, H. Kosuge, S. Kataoka, T. Yamamoto, Takao Ohmori

    KAGAKU KOGAKU RONBUNSHU   34 ( 1 ) 64 - 69  2008.01  [Refereed]

  • Intensification of the process flow in the pilot plant of an internally heat-integrated distillation column (HIDiC)

    Kinpei Horiuchi, Masaru Nakaiwa, Koichi Iwakabe, Keigo Matsuda, Masayuki Toda

    KAGAKU KOGAKU RONBUNSHU   34 ( 1 ) 70 - 75  2008.01  [Refereed]

    　View Summary

    Operation and energy savings in the separation of a twelve-cornponent hydrocarbon mixture by the pilot plant of an internally heat-integrated distillation column (HIDiC) were studied. Based on the operation results, a HIM simulator was developed using the commercial process-simulation software. The operation and simulation results showed that zero external reflux and zero reboiler heat duty operation were the most economical operation conditions, and that energy reduction of 62% compared to the conventional distillation column is achievable under these conditions. With the HIDiC simulator developed, a process flow involving heat exchange between the overhead vapor and the feed was Studied, and the possibility of further energy-saving operation of the HIDiC was suggested.

  • A Rate-Based Model Approach To Internally Heat Integrated Distillation Columns (HIDiC)

    K. Iwakabe, K. Matsuda, M. Nakaiwa, K. Horiuchi, T. Nakanishi, A. Horiguchi, K. Kubo, T. Ohmori, T. Yamamoto, S. Kataoka

    Proceedings of AIChE Annual Meeting    2007

  • Process Intensification for the Distillation with Heat-Integration

    K. Matsuda, K, Iwakabe, T, Higuchi, M, Toda, M. Nakaiwa

    Proceedings of AIChE Annual Meeting    2007

  • Rate-based Modeling for Internally Heat-integrated Distillation Column (HIDiC) in Binary System

    Keigo Matsuda, Koichi Iwakabe, K. Kubo, A. Horiguchi, Y. Weifang, H. Kosuge, S. Kataoka, T. Yamamoto, Takao Ohmori, Masaru Nakaiwa

    J. Japan. Petrol. Inst   50 ( 3 ) 162 - 168  2007.01  [Refereed]

  • Dynamic Behavior of Reactive Distillation with Heat-Integration

    K. Matsuda, T. Ohmori, K. Iwakabe, A. Endo, T. Yamamoto, K. Huang, M. Nakaiwa

    Fifth International conference on un-steady state processes in catalysis    2006.11

  • Modelling and Process design of the Heat-Integrated Distillation Column (HIDiC) with a Rate-Based approach

    K. Matsuda, K. Iwakabe, M. Nakaiwa, T. Nakanishi, T. Ohmori, A. Endo, T. Yamamoto, S. Kataoka

    International Workshop on Process Intensification in Fluid and Particle Engineering    2006.10

  • Mass and Heat Transfer in Heat Integrated Distillation Column (HIDiC) with a Rate-Based Model

    K. Matsuda, T. Nakanishi, K. Huang, K. Iwakabe, T. Yamamoto, A. Endo, T. Ohmori, M. Nakaiwa

    Proceedings of 17th International Congress of Chemical and Process Engineering    2006.08

  • Choosing more controllable configuration for an internally heat-integrated distillation column

    Kejin Huang, Keigo Matsuda, Koichi Iwakabe, Takeichiro Takamatsu, Masaru Nakaiwa

    JOURNAL OF CHEMICAL ENGINEERING OF JAPAN   39 ( 8 ) 818 - 825  2006.08  [Refereed]

    　View Summary

    Seeking internal heat integration between the whole rectifying section and the whole stripping section gives rise to two alternatives for the arrangement of a reboiler in an internally heat-integrated distillation column. One is to locate it at the bottom of the process (scheme A) and the other on the pipeline of the feed flow (scheme B). Although the former appears to be less thermodynamically efficient than the latter, it is generally preferable to scheme B from the viewpoint of process dynamics and operation. A detailed simulation study justifies the conclusion.

  • Graphical synthesis of an internally heat-integrated distillation column

    Kejin Huang, Keigo Matsuda, Koichi Iwakabe, Takeichiro Takamatsu, Masaru Nakaiwa

    JOURNAL OF CHEMICAL ENGINEERING OF JAPAN   39 ( 7 ) 703 - 708  2006.07  [Refereed]

    　View Summary

    With the aid of the McCabe-Thiele diagram, heuristic synthesis of an internally heat-integrated distillation column is addressed in this work. A new scheme for internal heat integration between a rectifying section and a stripping section is derived with the introduction of double-feed arrangement. The process configuration is characterized by its high thermodynamic efficiency and strong resilience to changes in operating conditions. Separation of a binary close-boiling mixture is conducted and the results obtained corroborate the advantages.

  • The influences of pressure distribution on an ideal heat-integrated distillation column (HIDiC)

    Kejin Huang, Keigo Matsuda, Takeichiro Takamatsu, Masaru Nakaiwa

    JOURNAL OF CHEMICAL ENGINEERING OF JAPAN   39 ( 6 ) 652 - 660  2006.06  [Refereed]

    　View Summary

    In this paper, the static and dynamic influences of pressure distribution are examined on an ideal heat-integrated distillation column. In the aspect of process design, pressure distribution is found to have an effect upon the thermodynamic efficiency and it appears beneficial to explore an optimum pressure distribution during process development. From the viewpoint of process operation, the dynamics of pressure distribution may give rise to a severe deterioration on process controllability. Therefore, it should be taken into account in control system design for an ideal HIDiC.

  • Preparation of Spherical Nanostructured Particles of Lithum Manganese Oxides by a Spray Pyrolysis and Fluidized Bed Hybrid System

    I. Taniguchi, H. Furubayashi, K. Matsuda, S. Nakajima

    Proceedings of the Fifth World Congress on Particle Technology    2006.04

  • Towards the Practical Application of the Internally Heat-Integrated Distillation Columns (HIDiC)

    M. Nakaiwa, K. Huang, K. Iwakabe, K. Matsuda, T. Ohmori, A. Endo, T. Yamamoto, S. Kataoka

    Proceedings of AIChE Annual Meeting    2006  [Invited]

  • A Rate-Based Model Approach to the Separation of Twelve-Component Hydrocarbons Mixture

    K. Iwakabe, K. Matsuda, M. Nakaiwa, K. Horiuchi, K. Iuchi, S. Hodumi, T. Nakanishi, T. Ohmori, A. Endo, T. Yamamoto, S. Kataoka

    Proceedings of AIChE Annual Meeting    2006

  • Modeling and Process Design of an Internally Heat-Integrated Distillation Column

    K. Matsuda, K. Iwakabe, M. Nakaiwa, T. Nakanishi, T. Ohmori, A. Endo, T. Yamamoto, S. Kataoka

    Proceedings of AIChE Annual Meeting    2006

  • Method of Design for Packed Column Type HIDiC

    T. Nakanishi, K. Aso, Masaru Nakaiwa, Keigo Matsuda, S. Hasebe, Takeichiro Takamatsu

    Inst. Chem. Eng.   152   851 - 853  2006.01  [Refereed]

  • An Internally Heat-Integrated Distillation Column (HIDiC) in Japan

    Kouichi Iwakabe, Masaru Nakaiwa, Kejin Huang, Keigo Matsuda, T Nakanishi, Takao Ohmori, Akira Endo, T Yamamoto

    Inst. Chem. Eng   152   900 - 911  2006.01  [Refereed]

  • Simulation of Ternary Distillation in a Heat Integrated Distillation Column (HIDiC) with a Rate-Based Model

    Keigo Matsuda, Koichi Iwakabe, Kejin Huang, Masaru Nakaiwa, T Nakanishi, K. Kataoka, Takeichiro Takamatsu, Takao Ohmori, Akira Endo, T. Yamamoto, S. Kataoka

    J. Chin. Inst. Chem. Engrs   37 ( 5 ) 467 - 474  2006.01  [Refereed]

  • Interpreting Design of an Ideal Heat-Integrated Distillation Column through Exergy Analysis

    Kejin Huang, Keigo Matsuda, Kouichi Iwakabe, T Takamatsu, Masaru Nakaiwa

    JOURNAL OF CHEMICAL ENGINEERING OF JAPAN   39 ( 9 ) 963 - 970  2006.01  [Refereed]

  • A Simple Method for Modeling Process Asymmetry

    Kejin Huang, Keigo Matsuda, Takeichiro Takamatsu, Masaru Nakaiwa

    JOURNAL OF CHEMICAL ENGINEERING OF JAPAN   39 ( 4 ) 448 - 452  2006.01  [Refereed]

  • Preparation of LiMn₂O₄ Powders via Spray Pyrolysis and Fluidized Bed Hybrid System

    I Taniguchi, Keigo Matsuda, H Furubayashi, S Nakajima

    AIChE J   52 ( 7 ) 2413 - 2421  2006.01  [Refereed]

  • エアロゾルプロセスを用いたマンガン酸リチウムの合成とそのリチウム二次電池特性

    松田圭悟

       2005  [Refereed]

  • Synthesis of Spinel LiMn₂O₄ Powders by the Drip Pyrolysis in Fluidized Bed Reactor

    Keigo Matsuda, H Furubayashi, I Taniguchi

    JOURNAL OF CHEMICAL ENGINEERING OF JAPAN   38 ( 5 ) 316 - 321  2005.01  [Refereed]

  • Relationship between the Electrochemical and Particle Properties of LiMn₂O₄ Prepared by Ultrasonic Spray Pyrolysis

    Keigo Matsuda, I Taniguchi

    J. Power Sources,   132 ( 1-2 ) 156 - 160  2004.01  [Refereed]

  • Particle Properties of LiMn₂O₄ Fabricated by Ultrasonic Spray Pyrolysis Method

    Keigo Matsuda, I Taniguchi

    KAGAKU KOGAKU RONBUNSHU   29 ( 2 ) 232 - 237  2003.01  [Refereed]

  • Prediction of Separation Performance of Binary Sieve Tray Distillation Columns by Simultaneous Heat and Mass Transfer Model

    K. Asano, K.Matsuda

    Proceeding of Regional Symposium on Chemical Engineering 1999    1999.10

▼display all

Books and Other Publications

  • プロセス強化（PI）の技術

    松田圭悟( Part： Contributor, 「蒸留分離プロセス」を担当)

    三恵社  2017.11

  • Energy technology roadmaps of Japan : future energy systems based on feasible technologies beyond 2030

    加藤, 之貴, Koyama, Michihisa, Fukushima, Yasuhiro, Nakagaki, Takao( Part： Contributor)

    Springer  2016.06 ISBN: 9784431559498

  • 分離技術のシーズとライセンス技術の実用化

    松田圭悟( Part： Contributor, 「蒸留」を担当)

    分離技術会  2014.11

  • いま必要な蒸留技術

    化学工学会, 化学工学会分離プロセス部会( Part： Contributor, 「反応蒸留」を担当)

    化学工学会関東支部,三恵社 (発売)  2012.12 ISBN: 9784864870238

  • いま必要な蒸留技術 (最近の化学工学 62)

    松田圭悟( Part： Contributor)

    三恵社  2012

  • 分離プロセス工学の基礎

    化学工学会分離プロセス部会( Part： Contributor, 第3章「蒸留」を担当)

    朝倉書店  2009.02 ISBN: 9784254252569

▼display all

Misc

  • 高分子膜を用いたCO2分離プロセスのテクノエコノミック解析

    藤田翔, 鈴木泰彦, 松田圭悟

    化学工学会年会研究発表講演要旨集(CD-ROM)   86th  2021

    J-GLOBAL

  • コンビナート・地域連携によるカーボンニュートラル推進

    かん蔗寂樹, 能村貴宏, 則永行庸, 松田圭悟, 久保田伸彦

    化学工学会年会研究発表講演要旨集(CD-ROM)   86th  2021

    J-GLOBAL

  • 熱交換ネットワークを用いた有機ランキンサイクルのエネルギー統合プロセス開発

    秋元良祐, 秋元良祐, 鈴木泰彦, 松田圭悟

    化学工学会年会研究発表講演要旨集(CD-ROM)   86th  2021

    J-GLOBAL

  • プロセス機器開発の新展開 カリーナ複合サイクルを用いた発電技術開発

    秋元良祐, 松田圭悟

    ケミカルエンジニヤリング   65 ( 2 )  2020

    J-GLOBAL

  • 高分子膜を用いたCO2分離回収プロセス設計と経済性評価

    藤田翔, 秋元良祐, 鈴木泰彦, 松田圭悟

    化学工学会年会研究発表講演要旨集(CD-ROM)   85th  2020

    J-GLOBAL

  • 気液接触型熱交換構造を有するバイナリー発電システムの開発

    秋元良祐, 秋元良祐, 小笠原由季, 鈴木泰彦, 松田圭悟

    化学工学会秋季大会研究発表講演要旨集(CD-ROM)   51st  2020

    J-GLOBAL

  • VLE measurement and Thermodynamic modeling of ETBA+Ethanol+TBA system for ETBE process design and Evaluation

    大場茂夫, 前田若奈, 佐藤敏幸, 日秋俊彦, 松田圭悟

    化学工学会年会研究発表講演要旨集(CD-ROM)   84th  2019

    J-GLOBAL

  • 多重定常状態での操作による反応蒸留プロセスの省エネルギー化検討

    山木雄大, 松田圭悟, 松田圭悟, NA-RANONG Duangkamol, 松本秀行, 大場茂夫

    化学工学会年会研究発表講演要旨集(CD-ROM)   84th  2019

    J-GLOBAL

  • プロセスシミュレーションを用いた新たな再生可能エネルギー利用システムの創成

    松本秀行, 松本秀行, 松田圭悟, 松田圭悟

    ペトロテック   42 ( 8 )  2019

    J-GLOBAL

  • 分離膜を用いたバイナリー発電プロセスの開発

    秋元良祐, 高根慧, 鈴木泰彦, 松田圭悟, 松田圭悟

    化学工学会年会研究発表講演要旨集(CD-ROM)   84th  2019

    J-GLOBAL

  • プロセス強化の最近の進展 強化された蒸留分離プロセスの経済性

    山木雄大, 松田圭悟

    化学工学   83 ( 12 )  2019

    J-GLOBAL

  • 無機膜を用いた高効率分離プロセスの設計と経済性評価

    松田圭悟, 松田圭悟, 高根慧, 山木雄大, 遠藤明

    日本膜学会年会講演要旨集   41st  2019

    J-GLOBAL

  • 温泉発電技術の社会実装と産学連携マネジメント

    松田圭悟

    化学工学    2019.01

    Article, review, commentary, editorial, etc. (bulletin of university, research institution)  

  • プロピレン/プロパン2成分系分離を対象とした蒸留-膜ハイブリッドプロセスの経済性評価

    松田圭悟, 高根慧

    化学工学会年会研究発表講演要旨集(CD-ROM)   83rd  2018

    J-GLOBAL

  • Three-dimensional structural analysis of porous TiO2 aiming for catalyst support

    大谷雅輝, 鈴木泰彦, 松田圭悟, 松田圭悟

    化学工学会秋季大会研究発表講演要旨集(CD-ROM)   50th  2018

    J-GLOBAL

  • Feasibility Study of the Methylcyclohexane Dehydrogenation Process using Reactive separation methods

    高根慧, 鈴木泰彦, 山木雄大, 松本秀行, 松本秀行, 松田圭悟, 松田圭悟

    化学工学会秋季大会研究発表講演要旨集(CD-ROM)   50th  2018

    J-GLOBAL

  • Development of Cascade Rankine Cycle and their Power Generation Performances

    秋元良祐, 鈴木泰彦, 中岩勝, 松本秀行, 松本秀行, 松田圭悟, 松田圭悟

    化学工学会秋季大会研究発表講演要旨集(CD-ROM)   50th  2018

    J-GLOBAL

  • システム・情報・シミュレーション

    桜井誠, 野田賢, 山下善之, 松田圭悟, 杉山弘和, 黒岡武俊

    化学工学   82 ( 10 )  2018

    J-GLOBAL

  • プロピレン-プロパン分離を対象とした膜分離-蒸留ハイブリッドプロセスの分離特性

    山木雄大, 吉宗美紀, 原伸生, 根岸秀之, 高根慧, 松田圭悟

    石油・石油化学討論会講演要旨   48th  2018

    J-GLOBAL

  • ハイブリッドナノ粒子で構成されたキャパシタ電極の開発

    島村宣寛, 松久保侑馬, 飯野達哉, 松田圭悟, 増原陽人

    ケミカルエンジヤリング    2017.12

    Article, review, commentary, editorial, etc. (scientific journal)  

  • 分離操作・蒸留

    松田圭悟

    化学工学    2017.10

    Article, review, commentary, editorial, etc. (scientific journal)  

  • 膜分離と蒸留のハイブリッド化によるプロピレン-プロパン分離の省エネルギー化

    山木雄大, 吉宗美紀, 原伸生, 根岸秀之, 遠藤明, 鈴木健太, 松田圭悟

    化学工学会年会研究発表講演要旨集(CD-ROM)   82nd  2017

    J-GLOBAL

  • カリーナサイクルを用いた低温熱源による発電プロセスのシミュレーション

    堂守佑希, 松田圭悟, 松田圭悟, 前田哲彦, 松本秀行, 中岩勝

    化学工学会年会研究発表講演要旨集(CD-ROM)   82nd  2017

    J-GLOBAL

  • バイナリー地熱発電における熱源有効ユニットの開発

    丸毛謙次, 名和博之, 増井龍也, 坂東芳行, 上田和則, 松田圭悟

    化学工学会年会研究発表講演要旨集(CD-ROM)   82nd  2017

    J-GLOBAL

  • 蒸留-膜ハイブリッドプロセスの経済性評価

    高根慧, 鈴木健太, 山木雄大, 松田圭悟, 松田圭悟

    化学工学会秋季大会研究発表講演要旨集(CD-ROM)   49th  2017

    J-GLOBAL

  • カスケード型バイナリーサイクルの開発とその発電特性

    秋元良祐, 堂守佑希, 松田圭悟, 松田圭悟

    化学工学会秋季大会研究発表講演要旨集(CD-ROM)   49th  2017

    J-GLOBAL

  • 再生可能エネルギー電力を利用するMCH製造プロセスにおける変動操作の影響解析

    松本秀行, 熱海良輔, 崔協力, 小島宏一, 松田圭悟, 難波哲哉, 辻村拓

    化学工学会秋季大会研究発表講演要旨集(CD-ROM)   49th  2017

    J-GLOBAL

  • 再生可能水素エネルギーの拡大を目的としたMCH脱水素プロセスの合成

    熱海良輔, 松本秀行, 松田圭吾, 小島宏一, 辻村拓

    化学工学会秋季大会研究発表講演要旨集(CD-ROM)   49th  2017

    J-GLOBAL

  • MCH脱水素化反応を指向したPt/TiO2粒子構造体触媒の合成とマルチスケール解析

    松田圭悟, 松田圭悟, 高橋理沙, 大谷雅輝, 高根慧, 熱海良輔, 松本秀行, 難波哲哉, 辻村拓

    化学工学会秋季大会研究発表講演要旨集(CD-ROM)   49th  2017

    J-GLOBAL

  • 温泉熱発電技術の社会実装のための産学連携マネジメント

    松田圭悟

    化学工学会秋季大会研究発表講演要旨集(CD-ROM)   49th  2017

    J-GLOBAL

  • P-4-9 Evaluation of 5kw class steam power generator for fluctuating thermal input condition

    河澄あかね, 堂守佑希, 前田哲彦, 和泉孝明, 矢野聖也, 浅見淳一, 藤岡完, 松田圭悟

    日本エネルギー学会大会講演要旨集(Web)   26  2017

    J-GLOBAL

  • 分離操作・蒸留

    松田圭悟

    化学工学    2016.10

    Article, review, commentary, editorial, etc. (scientific journal)  

  • 蒸留と膜もしくは吸着をハイブリッドした分離プロセスの展開

    松田圭悟

    化学工学    2016.09

    Article, review, commentary, editorial, etc. (scientific journal)  

  • フラクタル構造を有する多孔質チタニアの創製とその材料特性

    高橋理沙, 松田 圭悟

    Colloid & Interface Communication    2016.03

    Article, review, commentary, editorial, etc. (scientific journal)  

  • 中低温熱源利用小型バイナリーサイクルの発電シミュレーション

    堂守佑希, 和泉孝明, 伊藤洋, 藤岡完, 前田哲彦, 松田圭悟

    化学工学会年会研究発表講演要旨集(CD-ROM)   81st  2016

    J-GLOBAL

  • プロピレン-プロパン分離を対象とした膜と蒸留のハイブリッド方法と省エネルギー性

    山木雄大, 吉宗美紀, 原伸生, 鈴木健太, 松田圭悟, 松田圭悟, 根岸秀之, 遠藤明

    化学工学会秋季大会研究発表講演要旨集(CD-ROM)   48th  2016

    J-GLOBAL

  • C3splitterを対象とした蒸留-膜ハイブリッドプロセスの操作・設計条件に関する検討

    鈴木健太, 山木雄大, 松田圭悟, 松田圭悟

    化学工学会秋季大会研究発表講演要旨集(CD-ROM)   48th  2016

    J-GLOBAL

  • イオン液体を利用した環境調和型CO2吸収分離再生プロセスの開発

    児玉大輔, 松田圭悟, 牧野貴至, 金久保光央

    化学工学会秋季大会研究発表講演要旨集(CD-ROM)   48th  2016

    J-GLOBAL

  • 触媒担体を指向したフラクタル多孔質TiO2の合成とその微細構造解析

    高橋理沙, 松田圭悟, 松田圭悟

    化学工学会秋季大会研究発表講演要旨集(CD-ROM)   48th  2016

    J-GLOBAL

  • Development of Binary-Heat Pump Hybrid Cycle Power Generation via Hot Spring Thermal Energy

    松田圭悟

    化学系学協会東北大会プログラムおよび講演予稿集   2016  2016

    J-GLOBAL

  • オープンイノベーション手法を用いた再生可能エネルギー技術の社会実装

    松田圭悟, 松田圭悟, 武田哲, 齋藤祐輔, 小野浩幸, 高橋幸司, 高橋幸司

    産学連携学会大会講演予稿集(CD-ROM)   14th  2016

    J-GLOBAL

  • ヒートポンプ系省エネルギー蒸留システムの比較 : SUPERHIDICの優れた省エネルギー性

    若林敏佑, 松田圭悟

    ペトロテック    2016.01

    Article, review, commentary, editorial, etc. (scientific journal)  

  • 分離操作・蒸留

    松田圭悟

    化学工学    2015.10

    Article, review, commentary, editorial, etc. (scientific journal)  

  • 45周年記念 5年間の分離技術レビュー：蒸留・吸収

    松田圭悟

    分離技術    2015.04

    Article, review, commentary, editorial, etc. (scientific journal)  

  • IPA脱水プロセスに対する吸着-バッチ蒸留ハイブリッドシステムの省エネルギー性

    山木雄大, 松田圭悟, 松田圭悟, 遠藤明

    化学工学会秋季大会研究発表講演要旨集(CD-ROM)   47th  2015

    J-GLOBAL

  • AKDを用いた多孔質TiO2の合成とそのフラクタル性に関する検討

    高橋理沙, 松田圭悟, 松田圭悟

    化学工学会秋季大会研究発表講演要旨集(CD-ROM)   47th  2015

    J-GLOBAL

  • ヒートポンプを適用した蒸留システムの分離系とコスト評価に関する検討

    鈴木健太, 若林敏祐, 松田圭悟, 松田圭悟

    石油・石油化学討論会講演要旨   45th  2015

    J-GLOBAL

  • 石巻復興を目指したIT-デザイン-ものづくり融合による新産業創生

    松田圭悟, 樋口健志, 増原陽人, 落合文吾, 高橋幸司, 柳澤郷司, 長谷川琢也, 武居秀和

    産学連携学会大会講演予稿集   11th  2013

    J-GLOBAL

  • 化学工学の技術史

    松田圭悟

    化学工学    2011.09

    Article, review, commentary, editorial, etc. (scientific journal)  

  • マイクロ蒸留技術の最新動向

    松田圭悟

    配管技術    2011

    Article, review, commentary, editorial, etc. (scientific journal)  

  • マイクロ蒸留技術の展開

    松田 圭悟, 宍戸昌広

    分離技術    2011

    Article, review, commentary, editorial, etc. (scientific journal)  

  • WCCE8(Symposium of Energy Saving Distillation Technologies)に参加して

    松田圭悟

    化学工学    2010.04

    Article, review, commentary, editorial, etc. (scientific journal)  

  • 内部熱交換型蒸留塔（HIDiC）のシミュレーション

    松田 圭悟, 中岩勝

    ケミカルエンジニヤリング    2010

    Article, review, commentary, editorial, etc. (scientific journal)  

  • 省エネルギー蒸留技術

    松田圭悟

    分離技術200    2009.11

    Article, review, commentary, editorial, etc. (scientific journal)  

  • 内部熱交換型蒸留塔の実用化

    松田圭悟

    化学工学    2009.05

    Article, review, commentary, editorial, etc. (scientific journal)  

  • 速度論モデルを用いた内部熱交換型蒸留当（HIDiC）のシミュレーション

    松田圭悟, 岩壁幸市, 中岩勝

    ペトロテック    2009.04

    Article, review, commentary, editorial, etc. (scientific journal)  

  • 国際会議報告，2008 AIChE Annual Meeting Philadelphia, PA in Celebration of AIChE’s Centennial

    松田圭悟

    分離技術    2009.04

    Article, review, commentary, editorial, etc. (scientific journal)  

  • 最近の蒸留研究

    松田圭悟

    化学工学    2008.11

    Article, review, commentary, editorial, etc. (scientific journal)  

▼display all

Research Projects

  • プロセスシステム設計とLCAの統合によるCO2排出量の評価

    その他省庁等  内閣府戦略的イノベーション創造プログラム（SIP）

    Project Year :

    2018
    -
    2022
     

  • 熱エネルギー循環型ハイブリッドヒートポンプ給湯システムの開発

    経済産業省 

    Project Year :

    2021.04
    -
    　
     

  • 相界面制御による熱・物質移動促進プロセス技術開発

    経済産業省 

    Project Year :

    2021.04
    -
    　
     

  • CO2分離機能とエイジング耐性を兼備した多孔性複合膜

    文部科学省  未来社会創造事業（JST：MIRAI）

    Project Year :

    2019.08
    -
    2021.03
     

  • 産業活動由来の希薄な窒素化合物の循環技術創出―プラネタリーバウンダリー問題の解決に向けて

    新エネルギー・産業技術総合開発機構  ムーンショット型研究開発事業

    Project Year :

    2020
    -
    　
     

  • サイバーフィジカルシステムを用いたスマート化学プロセスの設計

    日本学術振興会  科学研究費補助金

    Project Year :

    2016.04
    -
    2019.03
     

    松田 圭悟

  • ハイブリッドイオン液体を利用した二酸化炭素吸収分離再生プロセスの開発

    文部科学省  研究成果最適展開支援事業（JST：地域産学バリュープログラム）

    Project Year :

    2017
    -
    2018
     

  • 革新的分離技術の導入による省エネ型基幹化学品製造プロセスの研究開発

    経済産業省  エネルギー環境技術先導プログラム（NEDO）

    Project Year :

    2015
    -
    2017
     

  • 再生可能熱エネルギーを用いた融雪用吸着式ヒートポンプシステムの開発とその実装技術に関する研究

    地方自治体  平成28年度米沢市研究奨励補助金事業

    Project Year :

    2016
    　
    　
     

  • スクロール膨張機を用いた5kＷ級変動対応熱発電システムの開発

    経済産業省  中堅・中小企業への橋渡し研究開発促進事業（NEDO）

    Project Year :

    2015
    -
    2016
     

  • 小野川温泉のブランド化を目指す温泉熱発電プロセス設計とエネルギーパーク構想

    地方自治体  平成27年度米沢市研究奨励補助金事業

    Project Year :

    2015
    　
    　
     

  • モデルベースイノベーション研究拠点

    山形大学 

    Project Year :

    2012
    -
    2014
     

  • バッチ式内部熱交換型蒸留塔の実用化開発

    文部科学省  研究成果最適展開支援事業（JST：A-STEP：本格研究開発（シーズ育成））

    Project Year :

    2011
    -
    2013
     

  • 塗布型透明導電膜製造プロセスの開発

    文部科学省  研究成果最適展開支援事業（JST：A-STEP：FS・探索タイプ）

    Project Year :

    2011
    -
    2012
     

  • ヒートポンプアシストによる内部熱交換バッチ蒸留塔の開発

    文部科学省  研究成果最適展開支援事業（JST：A-STEP：FS・顕在化タイプ）

    Project Year :

    2010
    　
    　
     

  • バッチ式内部熱交換型蒸留塔による省エネルギー型廃溶剤精製技術の開発

    文部科学省  重点地域研究開発推進プログラム（JST：地域ニーズ即応型）

    Project Year :

    2009
    -
    2010
     

  • 流動層式バイオリアクターによる畜産由来臭気除去システムの開発

    地方自治体  山形県価値創造型研究開発推進事業

    Project Year :

    2008.06
    -
    2009.03
     

  • フラクタルAKDを用いたナノ空孔を有する多元系セラミックス微粒子の開発

    文部科学省  地域イノベーション創出総合支援事業（JST：シーズ発掘試験）

    Project Year :

    2009
    　
    　
     

  • 内部熱交換による省エネ蒸留プロセスの開発

    地方自治体  平成19年度米沢市研究奨励補助金事業

    Project Year :

    2007.06
    -
    2008.03
     

▼display all

Presentations

  • A Rate-Based Model Approach To Internally Heat Integrated Distillation Columns (HIDiC)

    Koichi Iwakabe, Keigo Matsuda, Masaru Nakaiwa, Kinpei Horiuchi, Toshinari Nakanishi, Akio Horiguchi, Kazuya Kubo, Takao Ohmori, Takuji Yamamoto, Sho Kataoka

    AIChE Annual Meeting 2007  (Salt Lake City)  AIChE

    Presentation date： 2007.11

    Event date：
    2007.11
    　
    　

  • Process Intensification for the Distillation with Heat-Integration

    Keigo Matsuda, Koichi Iwakabe, Masaru Nakaiwa, Takeshi Higuchi, Masayuki Toda

    AIChE Annual Meeting 2007  (Salt Lake City)  AIChE

    Presentation date： 2007.11

    Event date：
    2007.11
    　
    　

  • Dynamic Behavior of Reactive Distillation with Heat-Integration

    K. Matsuda, T. Ohmori, K. Iwakabe, A. Endo, T. Yamamoto, K. Huang, M. Nakaiwa

    Fifth International conference on un-steady state processes in catalysis 

    Presentation date： 2006.11

    Event date：
    2006.11
    　
    　

  • Towards the Practical Application of the Internally Heat-Integrated Distillation Columns (HIDiC)

    M. Nakaiwa, K. Huang, K. Iwakabe, K. Matsuda, T. Ohmori, A. Endo, T. Yamamoto, S. Kataoka

    AIChE Annual Meeting 2006 

    Presentation date： 2006.11

    Event date：
    2006.11
    　
    　

  • A Rate-Based Model Approach to the Separation of Twelve-Component Hydrocarbons Mixture

    K. Iwakabe, K. Matsuda, M. Nakaiwa, K. Horiuchi, K. Iuchi, S. Hodumi, T. Nakanishi, T. Ohmori, A. Endo, T. Yamamoto, S. Kataoka

    AIChE Annual Meeting 2006 

    Presentation date： 2006.11

    Event date：
    2006.11
    　
    　

  • Modeling and Process Design of an Internally Heat-Integrated Distillation Column

    K. Matsuda, K. Iwakabe, M. Nakaiwa, T. Nakanishi, T. Ohmori, A. Endo, T. Yamamoto, S. Kataoka

    AIChE Annual Meeting 2006 

    Presentation date： 2006.11

    Event date：
    2006.11
    　
    　

  • Heat-integrated distillation

    K. Matsuda

    PSE Japan User Meeting 2006 

    Presentation date： 2006.09

    Event date：
    2006.09
    　
    　

  • Modelling and Process design of the Heat-Integrated Distillation Column (HIDiC) with a Rate-Based approach

    K. Matsuda, K. Iwakabe, M. Nakaiwa, T. Nakanishi, T. Ohmori, A. Endo, T. Yamamoto, S. Kataoka

    International Workshop on Process Intensification in Fluid and Particle Engineering 

    Presentation date： 2006.09

    Event date：
    2006.09
    　
    　

  • Method of Design for Packed Column Type HIDiC

    T. Nakanishi, K. Aso, M. Nakaiwa, K. Matsuda, S. Hasebe, T. Takamatsu

    Distillation & Absorption 2006 

    Presentation date： 2006.09

    Event date：
    2006.09
    　
    　

  • An Internally Heat-Integrated Distillation Column (HIDiC) in Japan

    K. Iwakabe, M. Nakaiwa, K. Huang, K. Matsuda, T. Nakanishi, T. Ohmori, A. Endo, T. Yamamoto

    Distillation & Absorption 2006 

    Presentation date： 2006.09

    Event date：
    2006.09
    　
    　

  • Mass and Heat Transfer in Heat Integrated Distillation Column (HIDiC) with a Rate-Based Model

    K. Matsuda, T. Nakanishi, K. Huang, K. Iwakabe, T. Yamamoto, A. Endo, T. Ohmori, M. Nakaiwa

    17th International Congress of Chemical and Process Engineering (CHISA) 

    Presentation date： 2006.08

    Event date：
    2006.08
    　
    　

  • Preparation of Spherical Nanostructured Particles of Lithum Manganese Oxides by a Spray Pyrolysis and Fluidized Bed Hybrid System

    I. Taniguchi, H. Furubayashi, K. Matsuda, S. Nakajima

    the Fifth World Congress on Particle Technology 

    Presentation date： 2006.04

    Event date：
    2006.04
    　
    　

  • Simulation of Ternary Distillation in a Heat Integrated Distillation Column (HIDiC) with a Rate-Based Model

    K. Matsuda, T. Nakanishi, K. Huang, K. Iwakabe, T. Yamamoto, A. Endo, T. Ohmori, M. Nakaiwa

    AIChE National Spring Meeting 2006 

    Presentation date： 2006.04

    Event date：
    2006.04
    　
    　

  • Prediction of Separation Performance of Binary Sieve Tray Distillation Columns by Simultaneous Heat and Mass Transfer Model

    K. Asano, K.Matsuda

    Regional Symposium on Chem.Eng 99 

    Presentation date： 1999.11

    Event date：
    1999.11
    　
    　

▼display all

 

Committee Memberships

  • 　
    　
    　

    国際電気標準会議（IEC）PC126（Binary Power Generation Systems）  国際議長

  • 　
    　
    　

    分離技術会総務委員会  委員

  • 　
    　
    　

    石油学会東北支部  幹事

  • 　
    　
    　

    化学工学会ダイナミックプロセス応用分科会  副分科会長

  • 　
    　
    　

    化学工学会蒸留分科会  副分科会長

  • 　
    　
    　

    化学工学会SIS部会  幹事

  • 　
    　
    　

    化学工学会分離プロセス部会  幹事

▼display all